Chemistry sulphuric acid

To keep the temperature at about K, the heat is removed by heat exchangers, Figure 4. Some Common Reactions Hot concentrated sulphuric acid oxidizes copper to copper sulphate. However, a small amount of the sulfur dioxide is not converted and is passed through the fourth bed of catalyst and the resulting gases, mainly sulfur trioxide, flow to the next stage.

It is common as a laboratory agent, an oxidizing and dehydrating agent. Concentrated sulphuric acid is a very strong dehydrating agent. The sulfur trioxide produced is removed between the third and fourth beds and flows to the next stage, the conversion of sulfur trioxide to sulfuric acid.

sulfuric acid density

Molten sulfur is sprayed into a furnace and burnt in a blast of dry air at about K. These contain sulfur compoundsboth organic and hydrogen sulfide both of which must be removed before they are used as fuels or chemical feedstock. As shown above, it is an exothermic reaction so, for a satisfactory yield of sulfur trioxide above It additionally expels water from natural mixes like starches.

Chemistry sulphuric acid

The function of the promoter is to lower the melting point of vanadium V oxide so that it is molten at K. Ans: The uses of sulphuric acid are: It is a common ingredient in the preparation of fertilisers like ammonium sulphate and superphosphate We use it in the manufacture of dyes, shades, and paints. The sulfur trioxide produced is removed between the third and fourth beds and flows to the next stage, the conversion of sulfur trioxide to sulfuric acid. It is highly corrosive and reactive and is soluble in water. In manufacturing one tonne of sulfuric acid, one tonne of high pressure steam is also produced. The gases are cooled to about K and the water in the surrounding boiler pipes is converted into steam. Thus, heat is removed from the gas leaving each bed using heat exchangers. It has a specific gravity of 1. In particular, China makes most of its sulfuric acid from pyrites, an iron sulfide ore. Sulphuric acid is a thick, colourless, oily fluid. These contain sulfur compounds , both organic and hydrogen sulfide both of which must be removed before they are used as fuels or chemical feedstock. Concentrated sulphuric acid is a very strong dehydrating agent.

Therefore, you must never add water to sulphuric acid. Please send these comments to: eci essentialchemicalindustry. These figures relate to -

Rated 10/10 based on 74 review
Download
Sulphuric Acid: Manufacture, Properties, Reactions, Uses, Videos, Q&A